Eureka 570 - Manual (Page 8)

FR ON T
Clean Dust Cup Filter
Clean the dust cup filter as necessary.
1. Remove dust cup.
2. Slide dust cup filter out of dust cup.
3. Shake and brush the dust and dirt from
filter. On the back of the dust cup is a
scraper that will help to remove debris
from the filter.
4. Replace filter with filter top facing up to
ensure proper filter installation.
Replace a dirty or torn filter. Order additional
dust cup filters from The Eureka Company,
Bloomington, IL 61701. Order dust cup filter,
part number 60958. Scraper
Filter Top
8
Maintaining a Charge in the Battery
This charger can be used two different ways. One way is with the battery installed in the
unit . The other is with the battery out of the unit sitting on a counter or shelf next to an
outlet. Once the battery is connected to the charger and the charger is plugged into an
outlet, the charge light will glow to indicate that the battery is charging.
NOTE: The power switch should be in off position while battery is charging.
NOTE: If the battery is charged while in the unit, be certain to disconnect charger
plug from battery before lowering handle of cleaner.
NOTE: Cleaner will not run when charger is connected and battery is in the unit.
NOTE: Charger light indicates power is going to battery.
It is all right to leave the cleaner on constant charge so it is always ready to use, but not
necessary. Unplug only if it will not be in use for several weeks at a time.
Battery Charged in Unit Battery Charged Out of Unit
HOW TO MAINTAIN
(continued)