Exmark FMD 604 - Manual (Page 13)

- 8 -
1.6 SAFETY SIGNS
1.6.1 Keep all safety signs legible. Remove all grease, dirt, and debris from safety
signs and instructional labels.
1.6.2 Safety signs must be replaced if they are missing or illegible.
1.6.3 When new components are installed, be sure that current safety signs are
affixed to the replaced components.
1.6.4 New safety signs may be obtained from your authorized Exmark equipment
dealer or distributor or from Exmark Mfg. Co. Inc.
1.6.5 Safety signs may be affixed by peeling off the backing to expose the adhesive
surface. Apply only to a clean, dry surface. Smooth to remove any air bubbles.
1.6.6 Familiarize yourself with the following safety signs and instruction labels. They
are critical to the safe operation of your Exmark commercial mower.
PART NO. 1-513747
LOCATION: Top Front of Battery Cover
FMD524 & FMD604 units only
PART NO. 103-2239
LOCATION: Top of Mower Deck
Beneath Center Shield
PART NO. 103-2432
LOCATION: Left Side of
Brake Lever
PART NO. 1-553040
LOCATION: Top Surface of Hydraulic
Reservoir
PART NO. 1-553049
LOCATION: On Top Front LH
Surface of Mower Deck
PART NO. 1-543624
LOCATION: Front Right
Foot Support
PART NO. 1-513746
LOCATION: Surface of Engine
Deck Next to Muffler
PART NO. 1-303508
LOCATION: On Top RH Surface
of Mower Deck
PART NO. 103-1077
LOCATION: Front RH Side of
Mower Deck