Silvercrest KH 997 - Manual (Page 64)

GB
MT
62 KH 997
Charging the Power Pack with the car adapter
IMPORTANT
Never leave the Power Pack in the car!
With strong sunlight and a correspondingly heated car interior ►
the Power Pack could become overheated and be irreparably
damaged.
1. Activate the rechargeable battery test button 2. One to three of
the charging indicator 1 LEDs light up and thus shows the current
rechargeable battery status. If all four LEDs light up then the
Power Pack is fully charged.
2. Connect the retractable USB cable u to the car adapter i.
3. Connect the Mini USB plug connection attachment r to the other
end of the retractable USB cable u.
4. Plug the Mini USB plug connection attachment r into the INPUT
DC 5 V 4 socket of the Power Pack.
5. Connect the car adapter i to a 12 V on-board power supply socket
and/or to a 12 V cigarette lighter socket. The charging indicator 1
LEDs blink one after the other and thus indicate that the recharge-
able battery is charging. If all of the charging indicator’s 1 LEDs are
constantly alight then the rechargeable battery is fully charged.
6. Disconnect the Power Pack from the car adapter i and pull the
adapter out of the 12 V on-board power supply socket and/or the
12 V cigarette lighter socket.