Silvercrest SWE 100 B1 - Manual (Page 106)

Multi-Band Tuner SWE 100 B1
104 - English
Connecting the Headphones
You can connect the supplied headphones SWE 100 B1 to the
headphones connector [20]. While the headphones are plugged in, the
speaker [18] is muted automatically.
Do not use any headphones other than the supplied
SWE 100 B1. Different headphones can produce
harmful sound pressure levels.
Backlight
While the device is powered on or off, press the LIGHT ☼ button [11] to
turn the backlight on for approx. 5 seconds.
While the backlight is on you can press the LIGHT  button [10] to turn it
off.
Setting the Sensitivity
Slide the DX/LOCAL switch [19] to the “DX” position to use the device in
normal mode.
Slide the DX/LOCAL switch [19] to the “LOCAL” position to receive strong
broadcasting station signals only. This is recommended whenever a
weaker local station is receiving interference from a stronger non-local
station.