Silvercrest SEC 60 A1 - Manual (Page 30)

28 GB
4. Push the lever for the filler shaft flap 8
back and the ice cube drops into the
crushing mill.
5. Once the ice cube has been crushed
and placed into the collecting con-
tainer 6, repeat work steps 3. - 4.
6. When the collecting container 6 is full
(or at the latest after 10 minutes),
switch the device off using the On/Off
switch 7 and unplug the power plug.
7. Remove the collecting container 6
and remove the crushed ice with the
ice scoop 5.
TIP: You can crush up to approximately
400 grams of ice per minute.
6. Cleaning
DANGER! Unplug the power plug
from the socket before you clean
the ice crusher.
• The casing of the ice crusher must not
be immersed in water or any other
liquids.
WARNING!
•
Do not use any aggressive or abrasive
cleaners.
• Clean all the accessories of the ice
crusher by hand. They are not suited
for the dishwasher.
Casing
• Clean the casing from the outside with
a soft, moistened cloth with a mild
soap solution.
Crushing Mill
• You can clean the crushing mill with
clear warm water. Do not use any hot
or soapy water to rinse the crushing
mill.
• Do not immediately after use or clean-
ing place the lid 1 back onto the device
to allow it to dry inside.
Accessories
• Clean the collecting container 6, the
ice scoop 5 and the lid 1 by hand with
mild washing-up liquid.
7. Storage
DANGER! Please store the ice
crusher outside the reach of chil-
dren.
• Do not wrap the power cord around
the device, but coil it up in the bottom
of the device.
• Let the device dry properly on the
inside before you move it to storage.
8. Disposal
The symbol showing a
wheelie bin crossed
through indicates that the
product requires separate
refuse collection in the Eu-
ropean Union. This applies
to the product and all ac-
cessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste,
but must be taken to a collection point for
recycling electric and electronic applianc-
es. Recycling helps to reduce the con-
sumption of raw materials and protect the
environment.
Packaging
When disposing of the packaging, make
sure you comply with the environmental
regulations applicable in your country.