Silvercrest SNHT 1.5 B2 - Manual (Page 46)

GB
MT
44 SNHT 1.5 B2
Trimming hairs in the ears
WARNING - RISK OF INJURY
Do not insert the cutting head ► 1 too deeply!
Remove (if fi tted) the comb attachment 1) 7/8 from the cutting
head 1.
Guide the cutting head 2) 1 carefully into the ear.
Slide the on/off switch 3) 3 upwards.
Use circular motions so that all unwanted hair growth is removed. 4)
Switch the appliance off by sliding the on/off switch 5) 3 downwards.
Cleaning and Care
WARNING - PROPERTY DAMAGE
NEVER submerse the appliance in water or other liquids! ►
NEVER hold the hand element ► 4 under running water!
Do not use sharp objects when cleaning the cutting head ► 1.
Do not use abrasive, aggressive or chemical cleaning ►
agents.
Clean the appliance after every use:
To remove hair from the cutting head ■ 1 and the comb attach-
ments 7/8, clean them with the cleaning brush 9.
Wipe the hand element ■ 4 with a moist cloth. For stubborn
soiling use a mild detergent on the cloth.
Clean the comb attachments ■ 7/8 under running water.
NOTICE
Do not use the appliance again until it has completely dried. ►
IB_67155_SNHT1.5B2_LB5_k.indb 44 IB_67155_SNHT1.5B2_LB5_k.indb 44 10.06.2011 9:34:53 Uhr 10.06.2011 9:34:53 Uhr