Silvercrest SNHT 1.5 B2 - Manual (Page 11)

9 SNHT 1.5 B2
GB
IE
NOTICE
At regular intervals place a few drops of blade oil suitable ►
for razor appliances in the cutting head holder 2, at the
latest when the blades no longer run smoothly.
For this you need to remove the cutter head holder ► 2:
Turn the cutter head holder 1) 2 anti-clockwise through
approx. 45° to release and remove it.
To reattach it, place the cutter head holder 2) 2 at about
45° to the right onto the hand element 4 and so that it
grips into the rail on the hand element 4.
Turn the cutter head holder 3) 2 in a clockwise direction
to secure it.
Storage
Store the appliance at a clean and dust-free location. ■
Always place the protective cover ■ 0 on the cutter head 1 to
protect it.
If the appliance is not to be used for an extended period, remove ■
the battery so as to avoid battery leakage.
IB_67155_SNHT1.5B2_LB3_k.indb 9 IB_67155_SNHT1.5B2_LB3_k.indb 9 10.06.2011 14:01:38 Uhr 10.06.2011 14:01:38 Uhr