Silvercrest SDJ 100 A1 - Manual (Page 9)

SilverCrest SDJ 100 A1
English - 7
Control elements
1 BROWSE Use this control to scroll through the tracks loaded in the software.
2 PITCH Turn this control to vary the track speed. You can set the minimum
and maximum speed here in the software.
3 FX Select the required effect by turning the SEL ON/OFF control. The
selected effect is shown here in the software. To activate the selected
effect, press the SEL ON/OFF control. Press the SEL ON/OFF
control again to deactivate the effect. You can vary the intensity of
the effect by turning the GAIN control.
4 JOG WHEEL With the JOG WHEELs you can "scratch" the track or fast forward to
a specific place in the track. You can select the required function
with the SCRATCH/SEARCH [10] button.
5 TREBLE This control serves for damping or amplifying high frequencies.
6 LOAD Press the A button to load the selected track in player A or the B
button to load the selected track in player B. Please note that the
track is only loaded if you have not already loaded a track into the
respective player and if the player is paused.
7 MASTER VOLUME Use this control to adjust the volume for both players.
8 BASS This control serves for damping or amplifying low frequencies (bass).
9 VOLUME This control only varies the volume of the required player.
10 SCRATCH/SEARCH Press this button to set the JOG WHEEL [4] to SCRATCH mode or
to SEARCH mode.