Silvercrest SUSR 17 A1 - Manual (Page 15)

Scanradio SUSR 17 A1
English - 15
Enabling the Alarm
After the desired alarm time has been set, you can
enable the alarm as follows:
 Press the AL ON button (4). The alarm icon will
show on the display (5).
 To disable the alarm, press the AL ON button (4)
again. The alarm icon will disappear from the display
(5).
 A repetitive sound will be heard at the time of the set
alarm. To disable the alarm sound, press the AL ON
button (4).