Silvercrest SNMD 33 A1 - Manual (Page 64)

64 GB / IE
Overlock stitches
Stitch Stitch width Stitch length
E, F 3~5 S1, S2
Note:
Use new needles or ball point needles or
stretch needle!
Seams, neatening, visible hems.
For fine knits, jerseys, neck edges, ribbing.
(A)
For fine knits, jerseys, neck edges, ribbing.
(B)
For fine knits, handknits, seams. (C)
All overlock stitches are suitable for sewing
and neatening edges and visible seams in
one operation.
When neatening, the needle should just go
over the edge of the fabric.
Stretch overlock
Standard overlock
Double overlock stitch
A B C
Sewing on lace and elastic, darning,
mending, reinforcing edges.
Place patch in position. The stitch length
can be shortened to produce very close
stitches. (1)
When mending tears, it is advisable to use a
piece of backing fabric to reinforce. The stitch
density can be varied by adjusting the stitch
length. First sew over the centre and then
overlap on both sides. Depending on the type
of fabric and damage, sew between 3 and 5
rows. (2)
Stitch Stitch width Stitch length
C 3~5 1~2
1 2
3-step zig-zag
Sewing basics