Silvercrest SWW 1500 A1 - Manual (Page 17)

15
Troubleshooting
SWW 1500 A1
GB
Troubleshooting
In this section you will receive important information for malfunction localization
and remedies.
WARNING
Observe the following safety information to avoid danger and property damage:
Repairs to electronic devices may only be carried out by specialists who ►
have been trained by the manufacturer. Considerable danger to the con-
sumer and damage to the device can occur as a result of incorrect repairs.
Malfunction causes and remedies
The following table will help with localizing and remedying minor malfunctions:
Defect Possible cause Solution
The device will
not switch on
The mains plug is not inserted.
Insert the plug into the mains power
socket.
The mains power socket is not
providing power
Check the house fuses
The device is
not providing
heat.
The main switch POWER 6 is
not switched on.
POWER/MODE
3 button and/
or 12 has not been activated.
The heating element is defective.
Switch on the main switch POWER 6 .
Activate the POWER/MODE 3
and/or 12 button.
Get in touch with customer service.
In the display
appears
the indicator
The heating element 9 is exces-
sively overheated
Switch off the device at the main
switch POWER
6 and pull out the
mains plug.
Allow the device to cool for a few
minutes.
In the display
appears
the indicator
Malfunction of the integrated
temperature sensor
Switch the device off and on at the
main switch POWER
6 .
If the indicator continues to appear
get in touch with the customer service
department.
NOTICE
If you cannot solve the problem with the aforementioned methods please ►
contact customer service.