Silvercrest Z30951A Z30951B Z30951C - Manual (Page 65)

63 GB/MT
the keys are out of operation. Only the SNOOZE /
LIGHT key
17 can be operated. In the event the
alarm goes off, the search for a signal will be ended.
As soon as the signal is found, the radio symbol
4
goes out.
Operation
Setting the 12 / 24 hour display
Note: No settings are possible during reception of
the DCF radio signal. Therefore, press the - / C / F /
RCC key
24 for about 3 seconds to interrupt reception
of the DCF radio signal.
1. Press the - / C / F / RCC key
24 for about
2 seconds until the radio symbol 4 blinks.
2. Press the - / C / F / RCC key 24 once again for
about 2 seconds to manually deactivate reception
of the DCF radio signal.
3. Hold the SET key 21 pressed down for about
2 seconds. The time display 1 blinks.
4. Press the + / 12 / 24 key 23 or the - / C / F /
RCC key 24 to specify the desired time setting
(12 / 24 hours).
Tip: Hold the + / 12 / 24-key 23 or the - / C / F /
RCC-key 24 pressed down. This will accelerate
the setting of the values. This fast setting can also
be used for the additional setting processes. If
you do not press any key within 20 seconds, the
LC display automatically returns to the standard
display.
5. Press the SET key 21 to confirm your entry.
6. Repeat steps 3 to 5 to set the values for minute,
hour, date / month or month / date, day, year 12 –
14 and language.
63698_silv_Projektions-Funkwecker_Content_LB5.indd 63 27.07.11 13:11