Silvercrest SKHL 1800 A1 - Manual (Page 9)

SKHL 1800 A1 7
3. Wait for the appliance to cool down.
4. You can then continue to operate it
normally.
5.6 Safety switch
The appliance is protected against
accidental damage by a safety switch
11 .
The safety switch 11 is located on the bottom
of the appliance and switches the appliance
off immediately should it fall over:
• Return the appliance to an upright
position. The appliance will switch on
again automatically.
5.7 Frost protection setting
With this function, the appliance prevents
the room temperature falling below the frost
line:
1. Turn the temperature selector 3 to
the frost symbol.
2. Select the low or high heat setting on the
function selector 1 (see “5.2 Selecting
functions” on page 6).
5.8 Fan function
1. Select the fan function on the function
selector 1 .
2. Set the temperature selector 3 to the
temperature from which the fan is to
work.
5.9 Transporting the appliance
If you wish to transport the apliance, always
carry it by the lift-up carry handle
7 .
6. Cleaning
To ensure your appliance gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of
an electric shock or burning:
– Remove the mains plug before
each clean.
– Allow the appliance to cool
down.
– Never immerse the appliance in
water.
– Never allow water or cleaning
agent to run into the appliance.
6.1 Cleaning the appliance
1. Carefully remove major dust deposits in
the air outlet 6 with a vacuum cleaner.
2. Remove any remaining dirt with a soft
brush.
Take care not to let any dust fall inside
the appliance. To prevent this, hold the
appliance with the air outlet
6 facing
downwards.
3. Clean the outside of the appliance with a
damp cloth. You could also use a little
washing-up liquid.
Caution! Never use caustic or abrasive
cleaning agents, as they could damage
your appliance.
4. Wipe it off with clean water.
5. Do not use the device again until it is
fully dry.
RP66523 KeramikHL LB4 Seite 7 Dienstag, 24. Mai 2011 9:36 09