Silvercrest SKHL 1800 A1 - Manual (Page 38)

36
6.2 Cleaning the dust filter
Warning! To avoid the risk of fire:
• Clean the dust filter 10 regularly.
A clogged dust filter could cause
a build up of heat.
• Never use the fan heater without
a dust filter, otherwise dust might
gather on the heating elements
and catch fire.
1. To remove the air inlet grille 9, press the
locks 8 downwards.
2. Remove the dust filter 10.
3. Clean the dust filter 10 and air inlet
grille 9 under running water.
4. Allow the dust filter 10 and air inlet grille
9 to dry thoroughly.
5. Replace the dust filter 10 and air inlet
grille 9.
7. Troubleshooting
Fault Cause Remedy
Appliance cannot be
switched on Faulty fuse or wall socket Select another wall socket
Faulty appliance Have repairs carried out at a specialist
workshop or dispose of the appliance.
You will find the service address in
“10. Warranty” on page 37.
Appliance switches
off automatically Safety switch has triggered Set the appliance upright (see
“5.6 Safety switch” on page 35)
Thermal cut-out has
triggered Allow the appliance to cool down (see
“5.5 Thermal cut-out” on page 34)
Clean the appliance (see “6. Cleaning”
on page 35)
Only cold air is pro-
duced Selected temperature has
been reached Appliance switches on again automati-
cally as soon as the room temperature
falls
Select a higher desired temperature
RP66523 KeramikHL LB5 Seite 36 Dienstag, 24. Mai 2011 9:39 09