Silvercrest SFW 100 A2 - Manual (Page 27)

31 GB/MT
Introduction / Important safety instructions
Important safety
instructions
Failure to comply with the following instructions can
cause personal injury or material damage (electric
shock, skin burns, fire).
The following advice on safety and hazards is in-
tended to protect your health and that of other peo-
ple as well as to protect the foot warmer. Please
observe these safety instructions and make sure
that you pass on this manual together with the foot
warmer.
DAnGEr to
LIFE AnD rISK oF ACCIDEntS
For InFAntS AnD CHILDrEn!
leave children unsupervised with the packag-
ing materials. Danger of suffocation.
DAnGEr oF
ELECtrIC SHoCK! Do not use the
mains power cable for purposes for
warmer is not permitted and could lead to injury
and/or damage to the product. The manufacturer
accepts no liability for any damage caused by
improper use.
Description of parts
1 Teddy lining, removable
2 Control unit
3 Function indicator
Included items
Immediately after unpacking, check that all the
items are present and that the product is in perfect
condition.
1 Foot warmer with removable teddy lining and
control unit
1 Set of operating instructions
technical Data
Model: SFW 100 A2
Type: FW 10
Power supply: 220–240 V∼ /
50–60 Hz
Power input: 100 W
Dimensions: approx. 26 x 26 x
30 cm (W x H x D)
Protection class: II /
Protection class
(water protection):
Foot warmer: IPX 1,
drip-resistant
Control unit: IPX0, no
moisture protection
Electric field strength: max. 5000 V / m
Magnetic field strength: max. 80 A / m
Magnetic flux density:
Max. 0.1 milli-Tesla
Material:
Surface of foot warmer: 100 % polyester
Inside:
teddy lining: 100 %
polyester
Manufacturer:
MGG Elektro GmbH
Königsbrückerstr. 61
01099 Dresden, Germany
IMPortAnt ADVICE – KEEP
tHIS SAFE For FUtUrE USE!