Silvercrest SNHT 1.5 A1 - Manual (Page 7)

Attaching and removing the blade attachment
³ Place the blade attachment 2 on the hand appliance 3 slanted by approx.
45° to the right so that it grasps the guides on the hand appliance 3.
³ Turn the blade attachment 2 clockwise to secure it.
³ Turn the blade attachment 2 anticlockwise to release and remove it.
Removing nasal and ear hairs
³ Assemble the blade attachment for nose/ear hairs 2 as described in the
chapter "Attaching and removing the blade attachment".
³ Double-check to ensure that the blade attachment 2 is firmly and securely
attached before taking the appliance into use.
³ First then switch the hand unit 3 on with the On/Off switch (slide the
switch upwards, number 1 visible).
³ Carefully insert the tip of the blade attachment 2 into the nostril / ear. The
rotating blades remove the hairs painlessly.
³ After use, switch the appliance off (slide the switch downwards, number 0
visible).
Cleaning and care
³ Remove the assembled blade attachment 2 from the hand unit 3 and
rinse it under running water.
Warning:
The hand unit 3 is only splashproof. NEVER submerse it in water. This could
irreparably damage the appliance.
- 5 -
IB_63709_SNHT1.5A1_LB3 16.02.2011 9:02 Uhr Seite 5