Silvercrest SPLK 200 A1 - Manual (Page 68)

SilverCrest SPLK 200 A1
66 - English
Troubleshooting
The power LED [1] does not light up.
 Socket defective or fuse tripped; check the socket with another device.
Connection to the PowerLAN adapter is not established.
 Do not use the PowerLAN adapter with extension leads.
 Test the PowerLAN adapter in another room to rule out different circuits
as the source of the error.
 Restore the PowerLAN adapter to the factory default settings. To do so,
press the reset button [4] with a pointed object.
Servicing/cleaning
It is necessary to service the device if it has been damaged in any way, for
example, if the housing is damaged, if liquid or objects have penetrated the
device or if the product has been exposed to rain or moisture. Servicing is also
required if the device is not working properly or has been dropped. If smoke is
produced, or there are any unusual sounds or smells, disconnect the device
immediately from the mains. In these cases the device should not be used until it
has been inspected by authorised service personnel. Only have the device
serviced by qualified personnel. Never open the housing of the device. There is
the risk of a fatal electric shock when the housing is open. Only use a clean, dry
cloth for cleaning and never use any corrosive liquids.