Silvercrest SKH 60 A1 - Manual (Page 10)

8 GB
8. Problem-solving
If your device fails to function as required, please try this checklist
first. Perhaps there is only a minor problem, and you can solve it
yourself.
WARNING! Risk of material damage!
Do not attempt to repair the device yourself under any circumstances.
Fault Possible causes/Action
No sound
• Check the connection between the
sound source and the headphones.
• Check the settings on your sound
source.
Sound only on one
side of the head-
phones
• Check the balance settings on your
sound source.
• Make sure that the TRS connector 7 is
fully inserted into the socket of the
sound source, or that any second set
of headphones used is properly
plugged in.
Sound is not transmit-
ted to a second set of
headphones via the
socket
4
• Make sure that the plug is fully inserted
into the socket
4 .
• Check the settings on the second set
of headphones.
__TOZ75980_B4.book Seite 8 Mittwoch, 8. August 2012 9:38 21