Operation – Silvercrest KH 8105 User Manual

Page 18

20 GB/IE

Operation

2. Carefully press on the protective cap

and remove

it with a gentle rotary motion and without using any
force.

3. Check that the measuring head

and the measuring

sensors are clean.

4. Hold the measuring sensor 1 cm away from the

forehead or temple.

5. To start the measurement, press on the “FOREHEAD”

button

. The symbol will appear in the LC display

and the measurement will start after an acoustic

signal.

6. The end of the measurement is indicated by 2 acoustic

signals.

7. Now you can read oﬀ the measurement result on the

LC display

. At the same time, one of the 3 LEDs

will come on.
Note: LED green

no fever 34.0 °C - 37.4 °C

(93.2 °F - 99.3 °F)
LED orange

slight increase in temperature

37.5 °C - 37.9 °C (99.5 °F - 100.2 °F)
LED red fever

38.0 °C - 42.9 °C

(100.4 °F - 109.2 °F)

8. Values can be displayed in °C as well as in °F

(see “Functions / error analysis - selecting the
temperature unit”).

9. Repeat steps 3 to 6 to carry out further measurements.

IB_61572_KH8105_LB3.indd 20

10.12.2010 14:23:01 Uhr