Silvercrest SSKB 2200 A1 - Manual (Page 59)

56 SSKB 2200 A1
GB
Handling and operation
In this chapter you receive important information for the handling and operation
of the appliance.
Switching the seat cushion on/off / Selecting the
temperature level
♦ Disconnect the connector plug of the power adapter 10 from the battery
pack 5 .
♦ Connect the connector plug of the seat cushion 3 into the connection
socket 6 of the battery pack 5 .
♦ Place the battery pack 5 into the storage compartment 2 of the seat cushion.
♦ Activate the function button 7 to switch the battery pack 5 on.
The battery pack 5 switches on with the temperature level I.
The function indicator of the battery pack 8 glows green.
♦ By repeated pressing of the function button 7 the desired temperature level
can be adjusted.
♦ To switch the seat cushion off , repeatedly press the function button 7 until
the function indicator 8 goes out.
Temperature levels
0 = OFF
I = minimal heat (function indicator 8 glows green)
II = medium heat (function indicator 8 glows orange)
III = maximum heat (function indicator 8 glows red)
NOTICE
► To quickly heat it initially, it is recommended to select the temperature level III.
You can switch it back later if a lower temperature level is needed.
► When the battery pack 5 is discharged, the function indicator 8 goes
out and the seat cushion is no longer heated.
Buch_77790_LB1.indb 56 Buch_77790_LB1.indb 56 31.07.12 16:19 31.07.12 16:19