Silvercrest SLNB 401 A1 - Manual (Page 59)

Universal Quad LNB SLNB 401 A1
English - 57
Connecting the Cables
 Only use high-end coaxial cable.
 Use a sharp knife to remove 10 mm of the outer insulation from the
cable end. Make sure that the shielding net does not get damaged.
 Next move the shielding net around the outer insulation of the cable
end.
 Remove 7 mm of the central lead insulation of the cable end. Make
sure that the central lead does not get damaged.
 Next rotate and push the F-type connector onto the cable end as
shown in the following figure.
Dimensions mm