Silvercrest SDBK 2200 A1 - Manual (Page 11)

- 9 -
Housing
Potentially fatal danger!
Disconnect the plug before cleaning. Otherwise
there is the risk of you receiving a potentially fatal
electric shock!
Risk of physical injury!
Allow the appliance to cool before cleaning it.
If you do not, there is a risk of you receiving burn
injuries!
• Clean the housing with a soft, dry cloth only.
Important!
Do not use aggressive, abrasive or chemical cleaning
agents. These could attack the surfaces and cause
irreparable damage to the appliance.
Metal parts
• Clean the metal components with a lightly water-
moistened cloth and a mild, non-abrasive cleaning
agent.
Troubleshooting
The steam iron blows out no or very little
steam:
The reserves of water in the steam iron are depleted.
Fill the water tank with mains water (See "Filling with
mains water").
The steam iron does not get hot:
The steam iron is not plugged in or is not switched
on. Insert the plug into a wall power socket and
adjust the temperature regulator 7 to the desired
ironing temperature.
The steam iron is defect. Arrange for the steam iron
to be repaired by qualified specialists.
Technical data
Power Supply Voltage: 220 - 240 V ~ / 50 Hz
max. power consumption: 2200 W
Disposal
Do not dispose of the appliance in your
normal domestic waste. This appliance
is subject to the provisions of European
Directive 2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations. In
case of doubt, please contact your waste disposal
centre.
Dispose of all packaging materials in an
environmentally friendly manner.
IB_68981_SDBK2200A1_LB4 30.08.2011 8:32 Uhr Seite 9