Eltax DV-280 - Manual (Page 21)

Reset Load Factory
8.Adult Parental
---- Password
Language Video Audio Rating
SYSTEM SETUP
20
RAW
96k 96k
48k
Digital Out
LPCM Out
Language Video Audio Rating
3.2 LPCM Out
Linear PCM setup:This option sets the audio
output format sent using the units coaxial or optical
digital audio output.
LPCM 48K
In the linear PCM setting, “48K” means “the digital
audio output maximum sampling rate is 48KHz”
Therefore, when the title’s encoding sampling rate
is 96KHz, the output will be forced converted to
48KHz.
LPCM 96K
If “96K” is selected, then the maximum output
sampling rate is 96KHz and no conversion will take
place.
4 RATING SETUP
4.1 Password
Password setup: In this setup item you can
change your password, and activate the parental
rating.
Locking and unlocking: The padlock symbol in
the right side of the screen, shows if the DVD-player
is locked or unlocked. Simply type in the existing
password to change the status.
Changing the password: Unlock the DVD-player
by typing the existing password. (The DVD-player is
unlocked when the padlock symbol to the right is
opened) Then type your new desired password.
When that is done, the padlock symbol on the right
of the screen will change to be locked again, and
the password is changed.
Note:
The default code is 7890
Reset Load Factory
8.Adult Parental
---- Password
Language Video Audio Rating
4.2 Parental setup
Reset Load Factory
8.Adult Parental
---- Password
Language Video Audio Rating
Parental setup: This function limits the playback of
some disc’s that contains mature scenes. The
limitation varies from disc to disc. When it is
activated, playback is completely prohibited. There
are eight levels of parental settings on the DVD-
player.
1. Kid, 2. G, 3. PG, 4. PG-13, 5. PGR, 6. R, 7. NC-
17 and 8. Adult.
NOTE:
In order to change the parental setting, the DVD-
player must be unlocked. See point 4.1
4.3 Reset
Load factory settings: When you select “RESET”,
all the initial settings will be restored to the default
setting.