Silvercrest H14271 H14271 - Manual (Page 8)

Getting started
8 GB
Weigh and add
The kitchen scale 2 allows you to weigh foods
consecutively without removing food already in the
weighing bowl
1 .
Place the weighing bowl 1 on the kitchen
scale 2 .
Press the ON/OFF button 3 to switch the
kitchen scale 2 on.
Select the unit of weight by pressing the Unit
button 6 . You can choose between “g/kg“
and “oz/lb“.
Place the food you wish to weigh in the bowl.
The LCD readout 5 indicates the weight of the
food in the selected unit of weight.
Now press the zero button 7 . The scale now
reads “TARE“.
Now place more food in the weighing bowl 1 .
The LCD readout 5 indicates the weight of the
food you have added in the selected unit of weight.
Continue in this way only until the maximum
capacity of the kitchen scale 2 is reached or
the weighing bowl 1 is full.
Remove part of the weighed
food
Place the weighing bowl 1 on the kitchen
scale 2 .
Press the ON/OFF button 3 to switch the
kitchen scale 2 on.
Select the unit of weight by pressing the Unit button
6 . You can choose between “g/kg“ and “oz/
lb“.
Place the food you wish to weigh in the bowl.
The LCD readout 5 indicates the weight of the
food in the selected unit of weight.
Now press the Zero button 7 .
Now remove the required amount of food from
the weighing bowl 1 .
The LCD readout 5 indicates the weight of the
food you have removed as a negative number.
Set the countdown timer/alarm
The timer on the kitchen scale has a time span of 0
to 99.50 minutes. The set time is counted down in
reverse to “0“. An alarm signal then sounds and
the alarm display “ “
15 flashes.
Press the ON/OFF button 3 to switch the
kitchen scale 2 on.
Press the Timer button 4 .
Set the required time by pressing the Timer button
“ “ 6 , or the Timer button “ “ 7 .
Press the Timer button 4 again to confirm the
set time and to start the countdown timer.
Press the Timer button 4 again to stop the
countdown timer.
Press the Timer button 4 again to reset the set
time to “0“.
NOTE: When the set time has elapsed, an
alarm signal sounds.
Press the ON/OFF button 3 to stop the alarm and
at the same time switch off the kitchen scale 2 .
Display ambient temperature
When the kitchen scale 2 is switched on, the LCD
readout 5 shows the current ambient temperature.
This is indicated by the temperature display 12 in °C.
Switch off the kitchen scale
The kitchen scale 2 switches itself off automatically
after 90 seconds of inactivity to save energy.
Press the ON/OFF button 3 to switch the
kitchen scale 2 off manually.
56423_silvkt_Kuechenwaage_Content_LB4.indd 8 27.08.10 09:53