Silvercrest SIKP 3400 A1 - Manual (Page 57)

55 SKIP 3400 A1
GB
Timer in the Temperature Mode
1) First, start the heating in the temperature mode as previously described..
2) Then press the button “F” q repeatedly until the control lamp Temperature
Mode 9 and the control lamp Timer 0 glow simultaneously.
3) Use the buttons “-” 5 and “+” 6 to set the required time, at the lapse of
which the cooking area 1 should switch itself off .
The display 7 now indicates alternately the set temperature level and the time
remaining until switch off .
After the expiration of the time, the cooking area 1 switches off automatically.
NOTICE
► If, while the timer is already running, you use the button "F" q to select the
power setting (control lamp Power Mode 8 glows) and set a power level,
the timer setting remains active and the appliance switches only from the
temperature mode to the power mode.
Child protection system
To prevent unauthorised switching on or a changing of the settings, by children
for example, this appliance is fi tted with a childproof lock.
■ Press and hold the button “Lock” z until a signal tone sounds and the
control lamp Child Safety u lights up. Now all of the buttons, except the
buttons “Lock” z and “On / Standby” t, are blocked.
■ To release the child safety block, once again press and hold the button
“Lock” z until a signal tone is heard and the control lamp Child Safety u
extinguishes. The buttons are now released.
NOTICE
► Should the child safety block be enabled during operation, the button
"On / Standby" t for switching off and the button "Lock" z can still be
activated.
NOTICE
► Use the child safety feature also as a wiping safety function: before you
wipe over the buttons with a damp cloth, activate the child safety feature.
This helps avoid an inadvertent actuation of buttons.
IB_75467_SIKP3400A1_LB5.indb Abs2:55 IB_75467_SIKP3400A1_LB5.indb Abs2:55 11.07.12 14:44 11.07.12 14:44