Silvercrest SVG 2.0 A1 - Manual (Page 13)

SilverCrest USB 2.0 Video Grabber SVG 2.0 A1 English
11
Appendix
Troubleshooting
The Video Grabber is connected but not recognised by the operating system.
Check all the connections.
Are you using a supported operating system?
New USB devices have been recognised and drivers must be installed.
When a USB device is connected to a new port it receives a new ID.
This normally requires driver installation, even if the driver is already
installed.
The video received over the S-Video cable is in black and white.
The playback source must be switched to S-Video.
Error message saying that the video is protected.
The copyright system has been activated. This material cannot be
copied.
Technical Data
Video input RCA video jack (yellow) / S-Video jack (black)
Audio input RCA audio jacks (red/white)
Video format PAL, NTSC
Video encoding MPEG 720x576 Pixel
Picture format BMP, JPG
Interface USB 2.0
Dimensions 73 x 30 x 11 mm (L x W x H)
Weight 14 g