Silvercrest KH 2299 - Manual (Page 68)

- 66 -
between "workdays" (Mo, Tu, We, Th, Fr), "weekends"
(Su, Sa) and "every day" (Su, Mo, Tu, We, Th, Fr, Sa).
Thereby, orientate yourself on the weekday indicator in
the display r:
Mo = Monday
Tu = Tuesday
We = Wednesday
Th = Thursday
Fr = Friday
Sa = Saturday
Su = Sunday.
5. If you hold the button TIMER s pressed down for 2 sec-
onds, you can also, through repeated brief pressing of
the TIMER s button, select a specific weekday (e.g. only
"We"). The selected setting is indicated in the display r.
6. To return to the selection of workdays, weekends or
whole weeks, once again hold the button TIMER s
pressed down for 2 seconds.
7. After 10 seconds the blinking in the display stops and
your input is saved. The appliance then returns to auto-
matic modus.
When the alarm signal sounds...
and the alarm function "Radio" has been selected, the •
radio plays for one hour at a pre-defined alarm volume.
To halt it, press the button AL1/VOL. + g (or AL2/VOL. –
f
).
and the alarm function "Signaltones" has been selected, •
the signal tone sounds for 10 minutes, with an increasing
volume. To halt it, press the button AL1/VOL. + g (or AL2/
VOL. – f).
The Reminder function
The appliance can remind you of a date that you have
set with the reminder function. In these cases, from 8:00 –
23:00 on that day, and at every full hour, the acoustic alarm
sounds for 10 minutes. In addition, the SDA-panel in the dis-
play r blinks. To stop the reminder alarm, press any button.
Radio operation
For radio reception, completely unwind the wire aerial e
and, with the radio switched on, determine the most favour-
able positioning for it. The appliance has a built-in ferrite
aerial for the reception of MW transmitters. Should the MW
reception be insufficient, please turn the appliance towards a
more favourable direction.