Silvercrest Z30441A - Manual (Page 43)

45 GB/MT
Operation / Troubleshooting
3. Place the substance to be weighed on the scale. The
weight of the substance being weighed is shown in the
LC display
1 .
Incremental weighing (Fig. A)
1. Follow steps 1 to 3 of the section on “Weighing” and
press the TARE button 2 . The LC display 1 shows 0
and the TARE symbol 8 appears.
2. Add another substance to be weighed to the scale. The
LC display 1 shows the weight of the newly added sub-
stance.
3. If you remove the added substance from the scale, the
LC display 1 shows 0.
4. If you remove all of the substances to be weighed from
the scale, the LC display shows a negative value 9 .
5. Press the TARE button 2 once and the TARE symbol 8
ceases to be displayed.
6. Activate the TARE function only within a range of 3–1,000 g.
If there is no substance to be weighed on the scale and if
60 seconds elapses without a button being pressed or no
movement on the scale plate is noted, the scale switches
automatically into the time mode
5 .
Troubleshooting
= Fault
= Cause
= Solution
=
= The scale is unstable or not quite plumb.
= Ensure the device is firmly fixed in place and exactly plumb.
d
e
e.
e.
p
e
p
g
c-
66233_silv_Kuechenwaage_Content_LB5.indd 45 15.06.11 09:48