Setup, Utilisation, Placing the cookware – Silvercrest SIKP 2000 B2 User Manual

Page 10: Switching on, Gb ie

SIKP 2000 B2

Setup

So as not to overheat, the appliance requires unrestricted ventilation. Therefore,
position the appliance such that ...

there is an all-round free space of minimum 10 cm, e.g. to the nearest

–

wall,
a free space directly above of minimum 60 cm, e.g. to a suspended wall

–

cabinet.

For cooling, the appliance draws in air through the openings on the underside.

Therefore, place it only on smooth surfaces, not on textiles or ﬂ uﬀ y surfaces,

■

such as tablecloths.

Do not place it adjacent to curtains, drapes or other textiles which, due to

■

the airﬂ ow, could press themselves against the appliance.

Utilisation

When you have unpacked and positioned the appliance as described above, it
is now ready for use.

Placing the cookware

Place the cookware in the middle of the cooking area

■

1. This may ...

not project beyond the edge of the cooking area

–

1...

not weigh more than 10 kg (together with the content).

–

Switching on

When cookware with content is standing on the hob

■

Insert the plug

–

2 into a mains power socket. A signal tone sounds and

„- L -“ appears on the display 8. The appliance is now ready for use.
Press the button On/Oﬀ

–

5. The control lamp POWER 4 lights up,

the control lamp Cooking w blinks, the symbol

ﬂ ashes below the

display 8 and „L5“ appears in the display 8. A signal tone sounds.
The appliance is now ready for use.

IB_66570_SIKP2000B2_GB_6.indd Abs3:8

04.07.2011 12:30:54 Uhr