Troubleshooting, Malfunction causes and remedies – Silvercrest SRD 250 A2 User Manual
Page 18
16
SRD 250 A2
GB
Troubleshooting
Troubleshooting
In this chapter you will receive important information for the locali-
sation of malfunctions and their remedies. Observe the instructions
in order to avoid danger and damage.
Malfunction causes and remedies
The following table will help with localizing and remedying minor
malfunctions:
Defect
Possible cause
Solution
Appliance
does not
switch on.
The plug is not
inserted.
Insert the plug into the
mains power socket.
Mains power socket
is not supplying
power.
Check the circuit fuse.
No sound
The volume is set to
minimum.
Increase the sound
volume with the
VOL regulator
18
.
Noisy radio
reception
The radio station
is not properly
tuned in.
Tune in the radio station
properly with the TUNING
regulator
7
.
Reception is
too weak.
Try to improve reception
by moving the wire
antenna
8
.
NOTE
If you cannot solve the problem with the aforementioned
►
methods, please contact Customer Service .
Buch_66666_LB4 indb Abs2 16
15 06 2011 12 06 51 Uhr