Silvercrest SRD 250 A2 - Manual (Page 13)

11 SRD 250 A2
GB
IE
Handling and operation
Open the cover of the battery compartment ♦ 11 on the bottom of
the device.
Insert two 1.5 V batteries type R6/LR6/AA/Mignon (not supplied)
♦
into the battery compartment 11 . For correct polarity make sure
that the batteries are inserted according to the diagram in the
battery compartment
11 .
Close the battery compartment ♦ 11 by replacing the cover and
allowing it to lock into place.
Providing mains power
Plug the mains power plug into a wall socket. The time of day ♦
(- -:- -) will be shown in the display 2 .
VHF wire antenna
For VHF reception completely unfold the wire antenna ♦ 8 .
Handling and operation
In this chapter you receive important information for the handling
and operation of the appliance.
Setting the time
Press the TIME button ♦
13
for about 2 seconds. In the display 2
appears the indicators for the 24-hour clock ( ).
Press the UP button ♦ 12 resp. DOWN button
10
to switch between the
24-hour clock ( ) indication and the 12-hour clock ( ) indication.
NOTICE
When the 12-hour clock presentation is set, from 12:00 midday ►
onwards a point (PM) appears in the display 2 at the top left.
Press the button TIME ♦
13
once again to accept the adjustment.
In the display 2 the hour indicator blinks.
B_66666_SRD250A2_GB3u6 indd Abs2 11 15 06 2011 10 18 17 Uhr