Silvercrest DV-5300HD - Manual (Page 53)

English
Silvercrest DV-5300HD
51
7
Troubleshooting
Fault Possible cause Solution
The camcorder can-
not be switched on. The battery is not correctly
inserted.
The battery is empty. Insert the battery cor-
rectly.
Charge the battery.
The camcorder sud-
denly switches off. The Auto Power Off func-
tion is activated.
The battery in the camcor-
der is empty. Switch the device on
again.
Change the battery.
The recorded image
was not saved. The power supply failed
before the image was
saved. Replace the battery im-
mediately when the bat-
tery LED lights up red.
The camcorder
switches off while a
photo is being re-
corded with the self-
timer. The battery in the camera
is empty. Change the battery.
The image is out of
focus. The motif was not in the
area of focus. Take a photo in the avail-
able area of focus and
select either Normal or
Macro Mode.
It is not possible to
use the memory
card. The memory card is write-
protected.
The memory card contains
non-DCF images from
other camcorders. Remove the write protec-
tion on the memory card.
Format the memory card.
Save the data elsewhere
before you format the
memory card.
None of the buttons
work. There was a short circuit
when the camera was
connected to another de-
vice. Remove the battery from
the camera and replace
it once more.