Silvercrest Z28414 - Manual (Page 11)

11 GB
How to use / What the interpreted readings mean / Trouble-shooting
1. Pick the control unit up and make sure that the
time is being displayed.
note: You can leave the control unit in the
scales. Make sure that the metal contact
13
of the control unit lies precisely on the metal
contact
4 of the scales.
2. Press the time / confirmation button 7 to be
able to get the stored personal data.
3. Press the count-up button 8 or the count-down
button 9 to get your profile memory.
note: When your data profile is displayed, the
LC display
11 will display all your personal settings.
4. Press the start button 10 .
5. Wait until “0,0 kg“, “0,0 lb“ or “0:0o st:lb“ is
displayed in the LC display 11 .
6. Step onto the platform 3 and stand still. Make
sure that you are standing on both electrodes 2 .
The weight measurement process will now start.
The display will blink 3 times. The weight meas-
ured will be displayed and stored. The LC display
11 will then display “00.0 000“. After that, it
will display the measured value three times in
rotation in two groups.
group 1: Calorie requirement
22 “kcal“,
body fat percentage 28 in % and body
water percentage 26 in %.
group 2: Weight “kg / lb / st:lb“ 20 , 21 , muscle
mass 30 in % and bone mass 27 in %.
After the values have been displayed, the time will
automatically be displayed again.
Q Retrieving last recorded values
note: This function is only available for data
profiles 1 - 12.
1. Make sure that the time is being displayed.
2. Press the start button
10 to be able to retrieve
the stored readings.
3. Press the count-up button 8 or the count-down
button 9 to select your data profile.
4. Press the time / confirmation button 7 and
wait about 3 - 4 seconds to allow the last stored
readings of the selected profile memory to be
displayed. The readings will be displayed in
rotation in two groups in the LC display
11
(see “Measuring weight, calorie requirement,
body fat, body water, bone and muscle per-
centages”, Point 6.).
Q What the interpreted readings mean
LCD display
Meaning too thin thin normal overweight extremely overweight
Q Trouble-shooting
Error display Meaning Solution
h-Lo The control unit batteries are flat. Change the batteries in line with the
section called “Inserting / replacing
the batteries”.
b-Lo The batteries in the scales are flat. Change the batteries in line with the
section called “Inserting / replacing
the batteries”.