Silvercrest SSK 100 A1 - Manual (Page 27)

27 GB/MT
Introduction / Important safety instructions
Parts description
1 Control (see fig. A)
2 Function display (see fig. A)
3 Plug-in connector (see fig. B)
4 Inner cushion (see fig. B)
5 Zip (see fig. B)
6 Casing with built-in heating pad (see fig. B)
Scope of delivery
Please check immediately on unpacking that the
delivery scope is complete and that the heating pad
is in perfect condition.
1 Heated Cushion
1 Control / plug-in connector
1 Set of instructions for use
Technical Data
Model: SSK 100 A1
Type: P10 cushion
Power supply: 220–240 V / 50–60 Hz
Power input: 100 W
Dimensions: approx. 40 x 30 cm
Protection class: II /
electric field strength: max. 5000 V / m
magnetic field strength: max. 80 A / m
magnetic flux density:
max. 0.1 milli-Tesla
Material:
Casing with built-in heating pad
Top /bottom:
100 % Polyester
Inner cushion: 100 % polyester
Manufacturer:
MGG Elektro GmbH
Steinstraße 27
40210 Düsseldorf, Germany
Introduction
IMPORTANT INFORMATION –
KEEP THIS SAFE FOR FUTURE REFERENCE!
Important safety
instructions
Failure to ob-
serve the following instructions can
cause personal injury or property
damage (electric shock, burns, fire).
The following safety instructions and
hazard warnings are not only in-
tended to protect your own health
and the health of others, but also to
prevent damage to the heating
pad. Please observe these safety
instructions and pass on this
operating manual together with the
heating pad.
SCALDING HAZARD!
This heating pad may not
be used by persons insensitive to
heat and other persons in need
of protection who do not respond
to overheating (e.g. diabetics,
persons with skin changes caused
by illness or scarred skin areas
in the application area after using
analgesics or alcohol). There is
a risk of receiving skin burns.