Silvercrest SEF 2100 A1 - Manual (Page 12)

10
9. Cleaning
9.1 Cleaning the Appliance
To ensure your product gives you lasting
service, you should clean it regularly.
Warning! To avoid the danger of
an electric shock:
• Remove the mains plug before cleaning.
• The operating/heating element 1 must
not under any circumstances be cleaned
under running water. Only clean it with
a damp cloth.
1. Remove the lid 12, frying basket 17 and
the operating/heating element 1.
2. Store the operating/heating element 1 in
a secure, dry place.
3. Remove the frying insert by the handles
8 and dispose of the oil or fat (see
"10.3 Oil" on page 11).
4. Clean the lid 12, frying basket 17,
frying insert 8 and casing 3 with a little
mild detergent in hot water.
5. Then rinse them with clean water and
dry them off carefully. Never use caustic
or abrasive cleaning agents or cleaning
materials such as scouring solution or
steel wool.
6. The lid 12, frying insert 8 and casing 3
can be washed in the dishwasher.
Note:
The permanent filter 15 is not
dishwasher safe.
7. First replace the frying insert in the
stainless steel fryer by the handles 8,
then the operating/heating element 1
and lastly the frying basket 17.
8. Fold the handle 19 into the frying basket
17 .
9. Roll up the mains cable and put it into
the cable compartment 6.
Note: You can easily transport the stainless
steel fryer by using the handles that are
fitted on the sides.
10. Always store the stainless steel fryer so
that it is kept free of dust by ensuring
that the lid 12 is always put on.
9.2 Cleaning the Filter
In the lid 12 there is a permanent filter 15,
which should be cleaned after every use of
the deep-fat fryer.
1. Open the filter
cover 14.
2. Lift off the filter
cover 14.
3. Remove the per-
manent filter 15.
4. Carefully clean the permanent filter 15
in the sink with a mild detergent.
Note:
The permanent filter 15 is not
dishwasher safe.
RP62049-Fritteuse LB6 Seite 10 Donnerstag, 2. Dezember 2010 2:53 14