Silvercrest KH 1098 - Manual (Page 32)

- 30 -
• Upturn the glass jug l .
• Press the two outer locks h / k inwards and
hold them firmly.
• You can now slide the coffee passage lock j
inwards. The coffee passage g opens itself.
Hold it open.
• You can release the outer locks h / k .
• Allow water to flow through the opened coffee
passage g . The residues in the sieve should be
washed out with the water. Should they still not
dissolve/detach themselves, gently scrub the sieve
with a soft brush.
• When the sieve is free of residues, release the
coffee passage lock j . The coffee passage g
is now closed.
Removing scale
Scale removal is already necessary after ca.
30 brewing processes with hard water, after
ca. 60 brewing processes with soft water.
Use only scale removal products that are suitable
for coffee makers and pay heed to the instructions
for use.
The procedure for scale removal is:
• Place the scale removal product in the water
tank e .
• Pour in the volume of water detailed in the usage
instructions for the descaler (max. 12 Cups).
• Press the button ON/AUTO/OFF s once.
The brewing process starts, the red indicator
lamp
y glows.
• Wait until the solution has completely run through
the Coffee Maker.
• After descaling, rinse the Coffee Maker through
twice with 12 cups of clean water each time.
Storage
• If you do not intend to use the Coffee Maker for
an extended period, remove the plug from the
power socket.
• Store the power cable in the cable shaft on the
rear of the Coffee Maker.
IB_KH1098_46649_LB5 08.01.2010 10:10 Uhr Seite 30