Silvercrest SPUV 90 A1 - Manual (Page 13)

Setting the alarm time
If the clock is set correctly, as described above:
1. Press the button AL1
y resp. AL2 u for 2 seconds. In the display j the
indicator for the alarm function resp. appears and the time indicator
blinks.
2. Press or hold the button HOUR r to set the hours.
3. Press or hold the button MIN t to set the minutes.
4. Press the button AL1 y resp. AL2 u once again. The programmed alarm
time will be taken over.
Radio alarm call
When the alarm time is set correctly, as described above:
1. Select and set the desired radio station, and the sound volume, with which
you wish to be woken (see also chapter Radio Operation).
2. Repeatedly press the button AL1 y resp. AL2 u until the symbol for radio
reception appears in the display j . At the programmed time the
radio will now switch itself on.
3. Press the button o to switch the radio off until the following day.
4. To deactivate the alarm function, repeatedly press the button AL1 y resp.
AL2 u until a symbol is no longer shown next to the indicator for the
alarm function resp. in the display j . After about 5 seconds the
device returns to just a time display and the indicator for the alarm
function disappears.
- 11 -