Silvercrest STGR 1600 A1 - Manual (Page 5)

- 3 -
Tips for safety:
• In cases of danger, immediately remove the elec-
trical plug from the socket.
• Never use the appliance for purposes other than
those for which it was designed.
• Avoid heat accumulation. Do not lay aluminium
foil or other grilling utensils on the grill bars. An
accumulation of heat could destroy plastic parts
as well as the non-stick coating.
• Use the Table grill exclusively with the supplied
thermostat.
• Take the grill plate into use ONLY when it is lying
on the catchment pan.
• Detach the power plug and cable from the
appliance when it is not in use, when you detach
parts or before cleaning the appliance.
Items supplied
Electric Grill
Splatter protection shield
Thermostat
Stand: Storage plate, top plate, 4 legs,
4 leg pads, 8 screws, 8 nuts
Operating Elements
q Grill bars
w Splatter protection shield
e Connection for power cable with thermostat
r Catchment pan
t Heat-insulated handles
y Heating element
u Indicator lamp
i Thermostat
Assembly of the stand
1. Insert the leg pads  on the ends of the legs 
where there is not a pre-drilled hole.
2. Assemble the legs
 onto the storage plate .
Insert screws through the pre-bored holes and
secure them with nuts from the inner side of the
storage plate
.
3. Place the top plate  on the legs  so that the
legs  lie against the pre-bored holes of the top
plate  from inside. The pre-bored holes in the
top plate
 as well as those in the legs  must
lie opposite each other.
4. Insert screws through the holes and secure them
with the nuts.






IB_61121_STGR1600A1_LB4 22.11.2010 15:46 Uhr Seite 3