Silvercrest SGBR 1500 A1 User Manual

Page 38

SGBR 1500 A1

GB
MT

Using the rotisserie

WARNING! RISK OF INJURY!

►

Always use the tongs w to insert the hot rotis-
serie z into the appliance or to remove it.

■

You can use the two skewer clamps t to ﬁ x the
food onto the rotisserie z. Loosen the restrainer r
on the skewer clamps t, push them so that the
food is ﬁ xed ﬁ rmly in between the clamps and
then screw the restrainer r tight again.

■

First push the end of the rotisserie z without the
notch into the drive 1 (Figure 1):

Fig. 1: Push the rotisserie z into the drive 1.

■

Then insert the other end of the rotisserie z with
the deep groove in the spit ﬁ tting 9 (Figure 2):

Fig. 2: Insert the rotisserie z in the spit ﬁ tting 9.

NOTE

►

Always slide the baking tray q into the lower
rail when you use the rotisserie z.
This will collect any drips.

■

To remove the hot rotisserie z, grip with
the hooks at the end of the tongs w into the
recesses on the rotisserie z (Figure 3):

Fig. 3: Hooking the tongs w onto the rotisserie z

■

First lift the left-hand side of the rotisserie z out
of the spit ﬁ tting 9 and then pull the rotisserie z
from the drive 1.

IB_102464_SGBR1500A1_LB5.indb 35

30.06.14 12:00