Silvercrest SKE 6 A1 - Manual (Page 26)

23 SKE 6 A1
GB
4) You can now remove the cut foil sleeve.
5) Grip the bottle fi rmly with one hand so that
it cannot fall over. Place the corkscrew onto
the wine bottle. Press it down fi rmly until the
corkscrew thread 7 perceptibly penetrates
the cork.
6) Then keep the lower button 5 depressed.
The corkscrew thread 7 is screwed into the
cork and then pulls it out of the bottle neck.
Keep a fi rm grip on the wine bottle and the
corkscrew while doing this.
7) Do not release the lower button 5 until the
cork has been completely removed from the
bottle neck.
8) Remove the corkscrew from the bottle and hold
it with the opening pointing downwards.
Then press the button 4. The cork is now
unscrewed from inside the corkscrew.
9) Release the button 4 as soon as the cork
falls out of the corkscrew.
NOTE
► You can use the foil cutter 6 as a stand for
the corkscrew:
Simply insert the corkscrew into the notch
on the top surface of the foil cutter 6. This
provides the corkscrew with a secure stand.
Cleaning and care
ATTENTION! MATERIAL DAMAGE!
Never immerse the appliance in water or
other fl uids!
► Do not use abrasive or aggressive cleaning
materials. These may damage the surfaces
of your appliance.
■ Clean the housing of the corkscrew and the foil
cutter 6 only with a slightly damp cloth. In case
of stubborn soiling, pour a few drops of a mild
detergent onto the damp cloth. Ensure that no
moisture enters the corkscrew during cleaning!
Storage
■ Always clean the appliance thoroughly before
storing.
■ If you do not intend to use the appliance for an
extended period of time, remove the batteries.
■ Store the cleaned appliance in a clean, dust-free
and dry place.
Troubleshooting
The appliance is not working.
■ The batteries are discharged/weak.
–
Insert new batteries as described in the
section "Inserting/replacing batteries".
■ The appliance is defective.
–
Contact Customer Service.
IB_100655_SKE6A1_LBCH.indb 23 IB_100655_SKE6A1_LBCH.indb 23 04.06.14 14:42 04.06.14 14:42