Livarno Z29549 - Manual (Page 7)

9 GB/MT
Introduction / Safety advice
Cabinet
Introduction
Before assembling and using the product for the first time, take time
to familiarise yourself with the product first. Read the following
assembly instructions and safety instructions carefully. Only use
the product as described and for the designated areas of application. Please
keep these instructions in a safe place. If you hand this product on to a third
party, you must also pass on all documents relating to the product.
Proper Use
This article is designed for the storage of small objects. The product is intended
for private indoor use only. Any use other than previously mentioned or any
product modification is prohibited and can lead to injuries and / or product
damage. The manufacturer is not liable for any damages caused by any use
other than for the intended purpose. The product is not intended for commercial
use.
Description of Parts
1 Top panel
2 Side panel (left)
3 Dividing panel
4 Side panel (right)
5 Base panel
6 Back panel
7 Shelf
8 Door (large)
9 Door (small)
10 Back panel for drawer
11 Side panel for drawer (left)
12 Side panel for drawer (right)
13 Base panel for drawer
14 Front panel for drawer
15 Phillips screw (approx. ø 5 x 35 mm)
16 Wooden dowel (approx. ø 8 x 30 mm)
17 Cam pin (approx. ø 6 x 39 mm)
18 Phillips screw (approx. ø 3.5 x 12 mm)
19 Metal runner
20 Phillips screw (approx. ø 4 x 13 mm)
21 Concealed hinges
22 Shelf support (approx. ø 8 x 13.5 mm)
23 Cam connector (approx. ø 15 x 12 mm)
24 Back panel stabilisers
25 Hexagonal socket head screw (approx. ø 7 x 50 mm)
26 Screw hook
27 Dowel
28 Cap
29 Plastic washer
30 Handle
31 Phillips screw (approx. ø 4 x 20 mm)
32 Foot
33 Phillips screw (approx. ø 4 x 25 mm)
34 Allen key
35 Cam pin (approx. ø 6 x 25 mm)
36 Cam connector (approx. ø 10 x 10 mm)
37 Phillips screw (approx. ø 4 x 20 mm)
Supply Scope
Note: Take care when unpacking that you do not inadvertently throw away
any assembly material.
Immediately after unpacking, check that the delivery is complete and that the
product and all its parts are in perfect condition. Do not under any circum-
stances assemble the product if the delivery is incomplete.
1 x Top panel
1 x Side panel (left)
1 x Dividing panel
1 x Side panel (right)
1 x Base panel
2 x Back panels
2 x Removable shelves
1 x Door (large)
1 x Door (small)
2 x Back panels for drawer
2 x Side panels for drawer (left)
2 x Side panels for drawer (right)
2 x Base panels for drawer
2 x Front panels for drawer
8 x Phillips screws (approx. ø 5 x 35 mm)
12 x Wooden dowels (approx. ø 8 x 30 mm)
6 x Cam pins (approx. ø 6 x 39 mm)
38 x Phillips screws (approx. ø 3.5 x 12 mm)
4 x Metal runners
4 x Phillips screws (approx. ø 4 x 13 mm)
4 x Concealed hinges
8 x Shelf supports (approx. ø 8 x 13.5 mm)
6 x Cam connectors (approx. ø 15 x 12 mm)
8 x Back panel stabilisers
6 x Hexagonal socket head screws (approx. ø 7 x 50 mm)
2 x Screw hooks
2 x Dowels
14 x Caps
6 x Plastic washers
4 x Handles
8 x Phillips screws (approx. ø 4 x 20 mm)
5 x Feet
5 x Phillips screws (approx. ø 4 x 25 mm)
1 x Allen key
8 x Cam pins (approx. ø 6 x 25 mm)
8 x Cam connectors (approx. ø 10 x 10 mm)
6 x Phillips screws (approx. ø 4 x 20 mm)
1 x Assembly instructions
Technical data
Dimensions: approx. 70 x 80 x 39 cm (W x H x D)
Max. load capacity: 50 kg
Material: melamine-faced chipboard
Safety advice
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE!
WARNING! RISK OF LOSS OF LIFE OR ACCIDENT
TO INFANTS AND CHILDREN! Never leave children un-
supervised with the packaging materials. Danger of suffocation.
CAUTION! RISK OF INJURY! Make sure that all parts are undamaged
and assembled correctly. Improper assembly carries a risk of injury.
Damaged parts may affect the safety and function of the product.
Make sure that this product is standing on a solid, level surface.
Wall mounting is necessary otherwise the product may tip over.
CAUTION! Do not leave children unsupervised! The product is not a
climbing frame or a toy! Make sure that nobody, especially a child, climbs
on or leans against the product. The wall fastenings could be torn out of
the wall and the product could tip over, resulting in injury or damage.
Distribute weight upon this products‘ surface evenly so that it cannot overturn.
61417_liv_Kommode_Content_LB5.indd 9 03.01.11 11:27