Livarno Z29279 - Manual

3 GB
Introduction / Safety advice
Collector’s Display Cabinet
Introduction
Before assembling and using the product for the first time, take time
to familiarise yourself with the product first. Read the following as-
sembly instructions and safety instructions carefully. Only use the
product as described and for the designated areas of application. Please keep
these instructions in a safe place. If you hand this product on to a third party,
you must also pass on all documents relating to the product.
Proper Use
This article is intended for storing and displaying small, lightweight objects. The
product is intended for private indoor use only. Any use other than previously
mentioned or any product modification is prohibited and can lead to injuries
and / or product damage. The manufacturer is not liable for any damages
caused by any use other than for the intended purpose. The product is not
intended for commercial use.
Description of Parts
1 Top panel
2 Bottom panel
3 Side frames
4 Back panel
5 Glass panels (sides)
6 Glass shelves
7 Doors
8 Dowels (approx. ø 5.8 x 30 mm)
9 L-shaped metal plate
10 Screws (approx. ø 3.5 x 14 mm)
11 Magnetic door stopper
12 Glass support dowels (including 2 x spares)
13 Metal pins
14 Screws (approx. ø 4 x 27 mm)
15 Hinge caps
16 Screws (approx. ø 3 x 10 mm)
17 Door hinges
18 $2//ů9/
19 $2//l9screws (approx. ø 79x 50 mm)
20 Plastic caps
21 Feet
22 Dowels (approx. ø 8 mm)
23 Wall-mount-screws (approx. ø 4.5 x 60 mm)
24 Lock
25 Metal plate
26 Plastic rings
27 Screws (approx. ø 3.5 x 20 mm)
28 Nuts
29 Door handle
30 Metal stirrups
31 Bump cushion for metal stirrup
32 Bump cushion for door handle
33 Key
34 Lock with keyhole
35 Connection plate
36 Striker plate
37 Plain washer
38 Screw (approx. ø 3.5 x 7 mm)
39 Plastic caps for wall-mount screws
Supply Scope
Note: Take care when unpacking that you do not inadvertently throw away
any assembly material.
Immediately after unpacking, check that the delivery is complete and that the
product and all its parts are in perfect condition. Do not under any circum-
stances assemble the product if the delivery is incomplete.
1 x Top panel
1 x Bottom panel
2 x Side frames
1 x Back panel
2 x Glass panels (sides)
10 x Glass shelves
2 x Doors
10 x Dowels (approx. ø 5.8 x 30 mm)
1 x L-shaped metal plate
4 x Screws (approx. ø 3.5 x 14 mm)
1 x Magnetic door stopper
42 x Glass support dowels (including 2 x spares)
2 x Metal pins
4 x Screws (approx. ø 4 x 27 mm)
6 x Hinge caps
12 x Screws (approx. ø 3 x 10 mm)
6 x Door hinges
1 x
$2//ů9/
12 x $2//l screws (approx. ø 79x 50 mm)
6 x Plastic caps
4 x Feet
4 x Dowels (approx. ø 8 mm)
4 x Wall-mount-screws (approx. ø 4.5 x 60 mm)
1 x Lock
1 x Metal plate
2 x Plastic rings
18 x Screws (approx. ø 3.5 x 20 mm)
2 x Nuts
1 x Door handle
2 x Metal stirrups
2 x Bump cushion for metal stirrup
1 x Bump cushion for door handle
2 x Key
1 x Lock with keyhole
1 x Connection plate
1 x Striker plate
1 x Plain washer
1 x Screw (approx. ø 3.5 x 7 mm)
4 x Plastic caps for wall-mount screws
1 x Assembly and installation instructions
Technical data
Dimensions (without feet): approx. 68 x 110 x 20 cm (W x H x D)
Max. load: 1 kg per shelf
Safety advice
KEEP ALL THE SAFETY ADVICE AND INSTRUCTIONS IN A SAFE PLACE
FOR FUTURE REFERENCE!
WARNING! RISK OF LOSS OF LIFE OR ACCIDENT
TO INFANTS AND CHILDREN! Never leave children un-
supervised with the packaging materials. Danger of suffocation.
CAUTION! RISK OF INJURY! Make sure that all parts are undamaged
and assembled correctly. Improper assembly carries a risk of injury.
Damaged parts may affect the safety and function of the product.
Make sure that this product is standing on a solid, level surface.
Wall mounting is necessary otherwise the product may tip over.
B&RQWHQWB/%LQGG