Electrolux TBC 651 X - Manual (Page 9)

9
Using the child safety device
The child safety device prevents unintentional use of the appliance.
3
The child safety device can only be activated immediately after the appli-
ance has been switched on.
Switching on the child safety device
3
To override or switch the child safety device off sucessfully, the steps must
be performed immediately one after the other. No other sensor fields must
be touched between the steps described.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking
session; it remains activated afterwards.
Switching off the child safety device
Step Control panel Display
1.
Switch on appliance.
(Do not set a heat setting.)
/ (if hot)
2. Touch for 5 seconds is displayed.
Appliance switches off.
Step Control panel Display
1. Switch appliance on / (if hot)
2.
Touch the two of the front
cooking zones at the same
time
or
Decimal points flash
Until the appliance is next switched off, it can used as normal.
Step Control panel Display
1. Switch appliance on / (if hot)
2.
Touch for 5 seconds or
Decimal points flash
Appliance switches off.