Emerson CORNERSTONE CF1AB01 - Manual (Page 8)

Using Your Ceiling Fan
1. Restore electrical power to the outlet box by
turning the electricity on at the main fuse box.
2. Check the operation of the fan by gently pulling on
the 4-position speed control pull chain switch
(Figure 17). The operating sequence is as follows:
3. If airflow is desired in opposite direction, turn your
fan off and wait for the blades to stop turning, then
press the rocker switch located on top of the motor
housing, and turn the fan on again. The fan blades
will turn in the opposite direction and reverse
airflow.
8
Attaching Light Kit
To install an accessory light kit, first unscrew the finial
and remove the lower trim (Figure 18). Then remove
the center trim by removing four 8-32 x 1/2” screws.
Remove the threaded nipple from the center trim and
install the light kit in accordance with the light kit
Owner’s Manual.
To avoid possible electrical shock, be sure
electricity is turned off at the main fuse box before
wiring.
WARNING
!
SPEED
CONTROL
PULL CHAIN
SWITCH
THREADED NIPPLE
LOWER TRIM
FINIAL
8-32 x 3/8"
SCREW (4)
CENTER
TRIM
Figure 18
REVERSING
SWITCH
SPEED
CONTROL
PULL CHAIN
SWITCH
THREE-SPEED
1st Pull—HIGH
2nd Pull—Medium
3rd Pull—Low
4th Pull—OFF
Figure 17