Attendant wheel locks – E&J EJ777-1 User Manual
Page 16
16
GF0500090RevB07 • EJ777-1 Transport Chair
attendant wheel lock,
unlocked
attendant wheel lock,
temporarily locked
lower grip
push handle
attendant wheel lock,
unlocked
attendant wheel lock,
indefinitely locked
lower grip
push handle
aTTEndanT WhEEl loCks
WARNING: Wheel locks are not brakes. Do not use the wheel locks to slow down the
transport chair, or while the transport chair is moving. Wheel locks are
only intended to keep the transport chair in place when it is at a complete
stop.
For attendant: attendant wheel locks, temporary lock
The attendant wheel locks can be
engaged temporarily:
1. To engage attendant wheel
locks, squeeze the lower grip
upward toward the push han-
dle as shown at far right; the
rear wheels will be locked in
place as long as you hold the
lower grip as shown.
2. To release attendant wheel
locks, let go of the lower grip;
the rear wheels will be free to
move.
For attendant: Attendant wheel locks, indefinite lock (for transfer or
stationary periods)
1. To engage attendant wheel
locks indefinitely, push the
lower grip down, away from the
push handle, until it locks into
place. The rear wheels will be
locked in place.
2. To release attendant wheel
locks, pull the lower grip up-
ward toward the push handle
until the rear wheels move
freely.
WARNING: Ensure that wheel locks lock in place appropriately before occupying or
operating transport chair. If your wheel locks are not operating correctly,
please see your Graham-Field dealer for repair.