Sealey WPW9355 - Manual (Page 2)

2. INTRODUCTION & SPECIFICATIONS
Manufactured from high impact stainless steel for added durability and corrosion resistance. A range of pond pumps suitable for creating
garden water features such as fountains and waterfalls. Ideal for installing in traditional wells, clean water deposits, boreholes and garden
irrigation systems. 9 stage pump enables high flow rates, high heads and ensures a stable performance.
3. OPERATING INSTRUCTIONS
 WARNING! Ensure that you read, understand and apply the safety instructions in Section 1.
3.1. Start-up.
3.1.1. Use the rope supplied to lower into the water, make sure that the pump remains clear of any silt or debris at the bottom of the borehole
or well etc. (Fig.2).
3.1.2. Maximum immersion depth is to 15m and minimum bore hole diameter is 300mm.
3.1.3. Use the red switch to turn the pump on and off.
Technical Data.
Model No: WPW9355
Cut Out: Manual
Outlet OD: 38mm
Maximum Output: 93ltr(20gal)/min
Maximum Head: 55mtr
Number of Stages: 9
Motor Power: 1000W
Supply: 230V
Original Language Version
WPW9355 Issue: 1 - 19/11/13 © Jack Sealey Limited
fig. 1
fig. 2
fig. 3
4. MAINTENANCE
 WARNING! With the exceptions listed below, all pump and electrical cable service maintenance and repair must be
undertaken by an authorised service agent only. Failure to observe this rule may be dangerous and will invalidate your warranty.
 WARNING! Ensure that the pump is disconnected from the mains power supply before attempting any service or maintenance.
4.1. Cleaning the perforated end cap.
4.1.1. Unscrew the end cap anticlockwise.(Fig.3).
4.1.2. Rinse out with clean cold water.
Caution: never use the pump without the filter in place as this could lead to damage to the pump.
noTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
W e b
Environmental Protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
Parts support is available for this product. To obtain a parts listing and/or diagram,
please log on to www.sealey.co.uk, email [email protected] or telephone 01284 757500.
email