Sealey SAC12000 - Manual (Page 2)

2. INTRODUCTION
3. SPECIFICATION
4. INSTALLATION
Original Language Version
© Jack Sealey Limited
Thermostatically controlled unit with extendable exhaust hose and window kit - ideal for home or office environments. Features three-speed fan and
electronic remote control. Air conditioning temperature range 18-30°C. Also features heating and dehumidifying functions. Dehumidifier capable of
removing up to 33.6ltr/day. Refrigerant is R410A. Mounted on castors for manoeuvrability. Cable storage keeps unit tidy when not in use.
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAC12000
Cooling Capacity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12000Btu/hr
Supply: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1355W
Maximum Airflow: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435m³/hr
Maximum Water Extraction Rate:. . . . . . . . . . . . . . . . . . . 33.6ltr/day
Refrigerant:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . R410A
Discharge Side Pressure:. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5Mpa
Suction Side Pressure;. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1MPa
Exhaust Hose Length: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500mm
Energy Class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32.5kg
fig.1
1: Front Cover
2: Control Panel
3: Top Cover
4: Air Outlet Grille
5: Carrying Handle
6: Remote Control
7: Upper Filter Frame
8: Exhaust Air Outlet
9: Lower Filter Frame
10:Drain
11:Power Cable Stowage
12:Plug Stowage
13:Hose Adaptor (2 halves)
14:Exhaust Hose
15:Window Adaptor
4.1. IMPORTANT: Allow the refrigerant to settle for at least two hours before using the unit.
4.2. Exhaust Hose Assembly
4.2.1. Snap the two halves of the hose adaptor (fig.1.13) together (do not use excessive force).
4.2.2. Pull one end exhaust hose (fig1.14) out from its closed position.
4.2.3. Insert the end into the exhaust air outlet (fig.1.8) and turn in an anticlockwise direction until tight.
4.2.4. Pull the free end out and screw the assembled hose adaptor onto the outer end of the exhaust hose in an anticlockwise direction until
tight.
4.3. Window Adaptor
4.3.1. Slide the window adaptor to the correct width for the window opening and locate the stop screw in the relevant screw hole to stop the slide
closing.
4.3.2. Close the window onto the window adaptor, clamping it in place. This can be achieved with sash windows, sliding windows or vertically hinged
widows.
4.3.3. Insert the hose adaptor into the window adaptor (figs 2 and 3).
4.4. DO NOT use an extension hose or hose different from the one
supplied. The length and diameter of the hose supplied are the
optimum size for this unit. Changing those dimensions could
affect the performance.
4.5. Location
The SAC12000 should be located on a flat floor and be 500mm clear of any surrounding objects.
fig.2
fig.3
SAC120000 Issue: 1- 16/01/15
NOTE: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without
supervision.