Sealey MS900PSEU User Manual
Page 4
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMpORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park
,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
W e b
Original Language Version
MS900PSEU Issue: 1 - 16/01/13
WARNING! - Risk of hand Arm Vibration Injury.
This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC. When operated in accordance with these
instructions and tested in accordance with the standard below, results in the following vibration emission declared in accordance with
EN 12096:1997
Model No: MS900pSEu Sander/ polisher
Tested in Accordance with: BS EN ISO 28927-3:2009
Measured Vibration Emission Value (a): 3.402m/s²
uncertainty value (k): 1.5m/s²
These values are suitable for comparison with the vibration emission levels of other tools that have been obtained using the same
test method.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
A health and safety assessment by the user (or employer) will need to be carried out to determine the suitable duration of use for each tool.
Note that the value declared is an average figure from a series of tests according to the applicable standard. The value may differ
depending on a number of variables including but not limited to; the user; the condition of the tool; attachments made to the tool i.e. sockets,
grinding/cutting discs, sanding discs, blades, handlesand leader hoses.
health surveillance.
We recommend a programme of health surveillance to detect early symptoms of vibration injury so that management procedures can be
modified to help prevent significant handicap.
personal protective equipment.
We are not aware of any personal protective equipment (PPE) that provides protection against vibration injury by attenuating the vibration
emissions of this tool. We recommend a sufficient supply of clothing (including gloves) to enable the operator to remain warm and dry and
maintain good blood circulation in fingers etc.
Guidance relating to the management of hand arm vibration can be found on the HSC website www.hse.gov.uk – Hand-Arm Vibration at
Work.
Environmental protection.
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
WEEE Regulations.
Dispose of this product at the end of its working life in compliance
with the EU Directive on Waste Electrical and Electronic Equipment.
When the product is no longer required, it must be disposed of in an
environmentally protective way. Contact your local solid waste
authority for recycling information.
Parts support is available for this product. To obtain a parts listing and/or diagram, please log on to : www.sealey.co.uk,
email: [email protected] or phone: 01284 757500
© Jack Sealey Ltd