Sealey CP40MC - Manual (Page 2)

2. INTRODuCTION & SPECIFICATIONS
Recharges Sealey 12V Lithium-ion battery (model No: CP40BP) in 1
hour. LED's indicate when charging and when charging is complete.
Intelligent charging process maximizes battery life.
Input Supply: ................................................................. 230V AC 50hz
Output: ........................................................................... 12V DC - 1.5A
Weight: ........................................................................................0.5 kg
Battery model No (not included): ...........................................CP40BP
3. CHARGING
CHARGING THE BATTERY (NOT INCLuDED, ORDER
MODEL No: CP40BP)
Note: When new, the battery will have been shipped in a low charge
state. Fully charge the battery before using your tool
3.1 To remove the battery from the charger, depress the two
side clips on the battery. DO NOT touch the metal battery
terminals.
3.2 Take the base charger and plug it into the mains.
3.3 The battery is designed to fit into the charger one way
only. This is to ensure that the positive (+) and negative (-)
polarities correspond. Insert the battery and press lightly to
seat the battery firmly into the charging base, as in fig.1.
 WARNING! DO NOT try to force battery into the base the
wrong way around.
3.4 When the battery is inserted into the charger the green LED
(fig.1) will begin to flash, this indicates the battery is charging.
3.5 When the green LED (fig.1) stops flashing and is solid the
battery is fully charged.
3.6 If the red LED (fig.1) illuminates the battery is too hot to charge
and will need to cool down before the charging cycle begins.
3.7 If the red LED (fig.1) flashes this means either the battery is
not seated in the charger correctly or the battery is defective
and should be replaced.
3.8 Remove the battery from the charger. Switch off and remove
the plug from the mains. Push the battery back into the
charger (fig.2) until it snaps into place. The charger is now
ready for use.
Environmental Protection
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycle centre and disposed of in a manner
which is compatible with the environment.
When the product is no longer required, it must be disposed of in an environmentally protective way.
fig.1
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
01284 703534 [email protected]
Sole uK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park ,
Bury St. Edmunds, Suffolk,
IP32 7AR
www.sealey.co.uk
Web
email
Original Language Version CP4005 Issue: 2 - 01/03/10