EnGenius Technologies DURAFON-1X - Manual (Page 22)

~43~
(1) Use ¿orÀ to scroll through options: On, Off, and 8 Seconds. Default =
8 seconds, meaning that the backlight will turn off the backlight after 8
seconds of inactivity.
(2) When finished; press SAVE to save change.
h. Press “8” to edit Call Barring
(1) Need to Enter Password to edit the call barring code to be executed.
The default PW is “0000.”
(2) Please refer to page 36 for detail operation.
i. Press “9” to enable Name tag
(1) Use ¿orÀ to switch between On and Off. The default setting is Off.
(2) When finished; press
SAVE to save change.
j. Press “0” to program PBX features that you use frequently
(1) Program and save the most frequently used PBX functions into
DuraFon 1X system
(2) Please refer to page 38 for detail operation.
7. Press “6” to register or de-register handset and base: See the detail
instructions on page 29.
8. Press “7” to view inbox text message(s) or edit outbox text message(s).
See the detail instructions on page 37.
9. Press “8” to enter Call Manager setting.
a. Press “1” to edit “incoming call” setting. See the detail instructions
on page 32.
b. Press “2” to edit “outgoing call” setting.
(1) Once activate Select BS function, you need to enter the base ID which
you want to choose for an outgoing call.
(2) The default setting is OFF.
10. Press “9” then enter a base ID to access System settings. See the detail
instructions on page 32.
~44~
Technical Specifications
Electrical Specifications Base Station Portable Handset
Frequency 902-928 MHz 902-928 MHz
RF Power Peak: 708 mW
Average: 76 mW
Peak: 708 mW
Average: 76 mW
Channel Spacing 200 kHz 200 kHz
Number of Channels 128 128
Modulation MSK MSK
Multiple Access Frequency Hopping TDD Frequency Hopping TDD
Frequency Hopping
Rate
100 per second 100 per second
TDMA Frame Length 10 ms 10 ms
Number of Slots/Frame 4 4
Receiver Sensitivity < -108 dBm (@ BER 10 -2 ) < -108 dBm (@ BER 10 -2 )
Antenna Connector Reverse TNC Non-standard
Antenna Gain 2 dBi
5 dBi External (optional)
0.5 dBi (short antenna)
2 dBi (tall antenna)
TX Power Control
Range
NA 100-708 mW
Telephone Interface RJ11 x 2 NA
Speech Coding 8 kbps G.729A 8 kbps G.729A
Channel Coding 8 kbps Convolutional + CRC 8 kbps Convolutional + CRC
Transmission Data
Rate
170.678 kbps 176.678 kbps
User Data Rate 128 kbps duplex 128 kbps duplex
Duplex Time Division Duplex (TDD) Time Division Duplex (TDD)
Voice Quality TIA/EIA-470B TIA/EIA-470B
No. of System ID 65,536 65,536
Ring Signal 20-50 Hz, 12-90 Vrms NA
Flash Time 100-900 ms programmable NA
Power Source 120V/12V AC/DC Adapter 3.6 V, 1700 mAh Li-ion Battery
Charger Current NA 600 mA (900mA for spare
battery slot)
Charge Time NA 4 hours (from empty)
Regulation Compliance FCC Part 15, Part 68
CAN/DOC RSS210, CS03
FCC Part 15, Part 68
CAN/DOC RSS210, CS03
Hearing Aid Compatible
Operating Temperature -10 – 60 qC -10 – 60 qC
Storage Temperature -10 – 70 qC -10 – 70 qC
Humidity 20 – 75 % 20 – 75 %
Dimension with antenna 188*161*42mm 161*58*31mm
Weight 424g 175g
Notes:
1. NA = Not Applicable.
2. The manufacturer reserves the right to change designs and specifications without
notice.